The stages are constructed with the multidirectional MULTICOM system and the walking surface is constructed with stage boards in aluminium. The stage board CONDOR EVENTS is made up of an aluminium frame onto which a Carply panel of 18 mm, non-slip, with a capacity load up to 600 daN/mq, fire resistant level 1 is applied. The board measures 50 x 200 cm. It is made to lean against the reinforced cross tube so that its surface is perfectly flat and ideal for any type of performance.

The stages are constructed with the multidirectional MULTICOM system and the walking surface is constructed with laminated beams and Carply panels. The Carply panel(thickness 18mm, modular unit 125 x 250cm) is made of birch wood, glued treated for external use with surfaces coated with phenolic (roughned/smooth) and protected edges (fire resistant level 1). The Carply panel is fixed to the laminated beams so as to form a perfectly uniform surface. The laminated beams are 20cm high and vary in length (390, 490, 590cm) suitable for any dimension of the modular unit stage.

Modular unit stage CONDOR EVENTS to create seating. The stand, compatible with the multidirectional MULTICOM system, is modular in height, in depth for 150 cm and in width for 250cm. The seats (in polypropylene) and the walking surfaces (in panels Carply 18mm, 600daN/mq) are both firerpoof level 1. The structure is certified according to the laws in force UNI 9217 (and following) and conforms to the necessary safety parameters.

The same elements which are used for the stages can be employed to set up the towers for lighting and audio apparatuses or for directional towers.

Fast and efficient, the system C74E is a modular aluminium cover for shows and manifestations, made up of a frame of beams with a module 200 x 250cm. It can be assembled by the means of a simple wrist pin with 4/6 manual or motorized winches according to the dimensions. The modular beams, with the higher profile bearing the tarpaulin and lower profile ø 48mm, have been set at a regular distance of about 200cm, and at a higher level than the orthogonal weight bearing beams to avoid the formation of dangerous excess of water due to the natural pliability of the tarpaulins. aluminium modular cover per for shows and manifestations, made up of a net frame m 2,00 x 2,50. It can be assembled by the means of a simple wrist pin, which can be raised con 4/6 manual or motorized hoists according to the dimensions. The modular beams, with the higher profile bearing the tarpaulin and lower profile ø 48mm, have been set at a regular distance of about 200cm, and at a higher level than the orthogonal weight bearing beams to avoid the formation of dangerous excess of water due to the natural pliability of the tarpaulins.